Monthly Archives: December 2017

ParaFlex-FV Mastic_featured
Product Data, ParaFlex, Accessories

ParaFlex FV Mastic

DESCRIPTION
ParaFlex FV Mastic is a one component fibre-reinforced MS-Polymer for the sealing of difficult and inaccessible roof details and connections. An additional mat reinforcement is not necessary.

ParaFlex FV Mastic is non-fading and UV-stable and therefore resistant to aging and also flexible at low temperatures. The material is one component and therefore more economical.

ParaFlex FV Mastic is used for repairs to all connections and penetrations on roofs and similar components that can only be reached with great difficulty and are made with fleece-reinforced liquid applied waterproofing membranes.

APPLICATION

ParaFlex FV Mastic adheres to almost any surface and the connections are permanently waterproof. Exceptions are substrates made of PE, PP, TPO, FPO, silicone and Teflon.

The substrate must be clean and dry, free of oil and grease, and prepared with ParaFlex Cleaner.

ParaFlex FV Mastic should be stored and applied at between +15°C to +25°C, and applied to a substrate that has a surface temperature of between +5°C to +35°C.

Fire resistance
Flammable material class B2.

Resistance to spreading fire and reading heat to DIN 4102-1 and EN 1187.

AluBase-Featured-400
Product Data, Vapour Control Layer, EshaFlex and EshaGum, EshaPlan, ParaFlex, EshaUniversal, ReadySeal, Vapour Control Layer, Vapour Control Layers, Vapour Control Layer, Vapour Control Layer

AluBase XL

DESCRIPTION
AluBase XL is a self-adhesive bituminous waterproofing membrane that forms a barrier against vapour and gases. Consisting of a self-adhesive low-thickness bituminous compound self protected by a glass fibre and a reinforced aluminium film.

The glass fibre and polyester reinforcement provides excellent resistance to puncture and the effects of work site foot traffic. The polyester coating on the aluminium top surface not only provides protection from alkalis that may be present in concrete and screeds but also provides a surface on to which most polyurethane adhesives will adhere.

The high tensile strength and puncture resistance of AluBase XL makes it suitable for use over profiled metal decking where resistance to worksite traffic is essential in order to maintain integrity of the vapour barrier.

AluBase XL provides a fast and easy means of waterproofing a roof structure prior to the installation of insulation and waterproofing whilst also providing an effective vapour barrier without the need for hot works or naked flame in its application.

For a comprehensive NBS J41 specification contact Radmat Building Products.

APPLICATION
Prior to installation, surfaces must be dry, clean, smooth and free of impurities.

If the surface is porous, apply a coat of Radmat Red Primer as per instructions.

The use of Primer where application is to new, clean and oil free metal is generally not required. A wrong use of primer can influence the membrane efficiency.

To achieve the best result, proceed as follows: always start by laying the rolls from the lowest point and work upwards, being careful not to create counter-gradient overlaps.

After installation, press the membrane well by hand, heavy broom or roller being very careful not to trap air pockets.

This membrane features an outer polyester film and cannot therefore be exposed directly to the sun for prolonged periods.