ProTherm-XPX layer featured

ProTherm Flex Infill

DESCRIPTION
ProTherm Flex Infill is used to infill at perimeters and around penetrations in conjunction with ProTherm Quantum ‘Hybrid’ and ‘Pure’ VIP insulation boards, ProTherm Flex Infill Boards are an all-round thermal insulation board with smooth surface and overlap.

For use in the ProTherm Quantum VIP Insulation System installed over any BBA Certified Inverted roofing systems.

ProTherm Flex Infill is a rigid, closed cell type Extruded polystyrene board with integral high density skin.  ProTherm Flex Infill has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification.

APPLICATION
Apply ProTherm Flex Infill parallel to roof perimeter long edges. Stagger end joints.

Lay ProTherm Flex Infill with edges in moderate contact without forcing.

Cut ProTherm Flex Infill to fit neatly to perimeter blocking and around penetrations through roof, when using a 2nd layer stagger joints of insulation from first layer.

Cut ProTherm Flex Infill to create an opening large enough to accommodate the installation of either a domical or flat grate into a flanged rainwater outlet.

Apply no more ProTherm Flex Infill than can be covered with aggregate ballast/concrete roof pavers/green roofing in the same day.

Keep ProTherm Flex Infill minimum 75mm from heat emitting devices, and minimum 50mm from sidewalls of chimneys and vents.

ProTherm-Regupol-featured

ProTherm Regupol RCM

DESCRIPTION

ProTherm Regupol RCM is used as a protection layer for ProTherm Quantum® PLUS+ VIP insulation board. It is only required in ProTherm Quantum® PLUS+ Pure applications when 20/40 mm rounded gravel ballast is being used as the surface finish. See BBA Certificate 20/5769 Product Sheet 1. 

Benefits
• Excellent impact and airborne noise performance 

• Minimal creep, even under high loads 

• Resistant to ageing and deformation 

• Quick and easy to install 

• Minimises construction heights 

• High quality and exact material thickness guaranteed 

• Zero ozone depletion potential (ODP), zero global warming potential (GWP) 

• Mildew and moisture resistant 

• Accreditation to ISO 9001, ISO 14001 and ISO 18001 

• Product manufactured using Recycled Materials and 100% recyclable 

APPLICATION
Loose lay and butt joint.  Tape where specified. Cut with appropriate heavy duty scissors.

ProTherm-XPX layer featured

ProTherm XPS Layer

DESCRIPTION

ProTherm XPS Layer is used to compliment the thermal performance of ProTherm Quantum VIP Panels, and as a packer board to achieve a required height in ProTherm Quantum ‘Hybrid’ systems.

For use in the ProTherm Quantum VIP Insulation System installed over any BBA Certified Inverted roofing systems.

ProTherm XPS Layer is a rigid, closed cell type Extruded polystyrene board with integral high density skin.  ProTherm XPS Layer has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification.

APPLICATION

Apply ProTherm XPS Layer parallel to roof perimeter long edges. Stagger end joints.

Lay ProTherm XPS Layer with edges in moderate contact without forcing.

Cut ProTherm XPS Layer to fit neatly to perimeter blocking and around penetrations through roof, when using a 2nd layer stagger joints of insulation from first layer.

Cut ProTherm XPS Layer to create an opening large enough to accommodate the installation of either a domical or flat grate into a flanged rainwater outlet.

Apply no more ProTherm XPS Layer than can be covered with aggregate ballast/concrete roof pavers/green roofing in the same day.

Keep ProTherm XPS Layer minimum 75mm from heat emitting devices, and minimum 50mm from sidewalls of chimneys and vents.