ReadySeal Pre-Wipe Kit contains specially selected cloths and high performance solution in a trigger spray that removes contaminants from the surface of ReadySeal prior to the application of ReadySeal Surface Primer.
ReadySeal Pre-wipe Kit should be used whenever applying new ReadySeal to ReadySeal that has been allowed to cure for more than 9 hours.
Designed specially for use with ReadySeal.
Sweep clean the surface of the existing ReadySeal to be wiped, typically this is the overlap area between applications, at penetrations or when repairing 3rd party damage.
Wipe the surface of the ReadySeal to be primed with the ReadySeal Pre-wipe Spray, a minimum 100mm wide area must be sprayed at the overlap or around a penetration or the point of damage.
Ensure the cloth being used to wipe the ReadySeal is clean. Use the ReadySeal cloth to wipe off the ReadySeal Pre-wipe Spray after 30 – 40 seconds. Dispose of the cloth when dirty.
Allow the surface to completely dry before applying ReadySeal Surface Primer or ReadySeal.
Always test on a small hidden portion of the surface to be cleaned to check compatibility and performance before commencing with the whole area.
Do not use below 5°C or above 30°C.
See Product Data sheet for detailed information.
Specific Gravity @ 25ºC
|24 months from the date of manufacture in the original unopened container|