Radmat A5196 is a solvent-free two component polyurethane adhesive (2K PU) that is resistant to water, chemicals and extreme temperatures (-30°C to 150°C) once fully cured. Suitable for bonding most types of insulation (EPS, PIR, CG and XPS) to metal, timber and concrete decks Radmat A5196 meets EMICODE EC1 plus specification.
Ensure all surfaces to be bonded are clean and free from grease, dust and other contaminants. Ceramic or polished surfaces should be abraded prior to being bonded.
1. Mix components A & B as a complete kit. If only a small area is to be covered mix the 2 components at a ratio of 5.7:1 by weight.
2. Apply the mixed adhesive to the substrate with a scraper or notched-trowel.
3. Bed the insulation into the adhesive applying sufficient weight to ensure the two substrates are in contact.
Consumption will depend on the smoothness of the surface, typically achieving between 4.5m2 and 8.5m2 per kit.
Once mixed pot life is 20 minutes at 20°C.
Cure time at 20°C is 180 minutes.
Full cure at 20°C is 24 hours.
Walkable after 20 – 30 minutes
5kg kit consisting of lid, cuvette and foil bag.
Radmat A5196 Part A, 5.6 litre poly pail.
Radmat A5196 Part B, foil bag.
|Cure-Time (20°C)||180 minutes/24 hours for full cure|
|Colour||Part A Cream, Part B Brown|
|Temperature Resistance||-30 to 150°C|
|Coverage||0.9m2/kg to 1.7m2/kg|