T: 01858 410 372
E: techenquiries@radmat.com
sales@radmat.com

Insulation

Inverted Roof Insulation

ProTherm G XENERGY SLP

DESCRIPTION

ProTherm G XENERGY SLP Inverted Roof Insulation is a unique rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G inverted roof insulation utilises infra-red blocking particles to scatter and reflect heat radiation. 

ProTherm G XENERGY SLP Inverted Roof Insulation has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and a Green Guide to Specification A+ rating. For use with Inverted Roof Waterproofing such as PermaQuik PQ6100, EshaFlex, EshaUniversal, ParaFlex FD and ReadySeal.

Use with ProTherm XENERGY MK Filter/Water Flow Reducing Layer prior to the installation of paving, ballast or green roof. For a comprehensive NBS J31 specification contact Radmat Building Products.

SUITABLE APPLICATIONS

ProTherm G XENERGY SLP is suitable for use in roofs, roof terraces, enclosed balconies over heated space and insulated walkways in an inverted roof construction. When used in the inverted roof constructions listed in the Fire Performance section below roof constructions incorporating ProTherm G XENERGY SLP achieve Broof(t4) Classification to BS EN 13501-5 as required by Approved Document B 2019 edition, Section B4, Limitations on roof coverings.

ProTherm G XENERGY SLP is not suitable for use in inverted roof applications on specified attachments such as projecting open balconies, projecting enclosed balconies, recessed open balconies or recessed enclosed balconies. ProTherm G XENERGY SLP is not suitable for use in warm roof applications (where the waterproofing is installed above the insulation board).

CERTIFICATES

ISO 9001:2008 Quality Management System, ISO 14001:2004 Environmental Management System, EPD as per ISO 14025 and EN 15804, Green Guide to Specification Certificate No. 508, BBA Certificate 19/5633.

FIRE PERFORMANCE

As a roofing system for roofs, roof terraces, enclosed balconies over heated space and insulated walkways
In accordance with Annex of Commission Decision 2000/553/EC, when used in an inverted roof specification including an inorganic covering of either loose laid gravel with a thickness of at least 50mm or a mass ≥ 80 kg/m², sand/cement screed to a thickness of at least 30mm, or cast stone or mineral slabs of at least 40mm thickness a roof system incorporating ProTherm G XPS XENERGY SLP can be considered to be unrestricted under the national Requirements (Classification Broof(t4) to BS EN 13501-5:2016).

BS EN 13501-5:2016 – When tested with a covering of 50mm thick concrete paving on 50mm high InStar plastic pedestal supports a roof construction incorporating ProTherm G XENERGY SLP achieved a classification of Broof(t4) and as such is unrestricted by the National Building Regulations.

BS 476 Part 3: 2004 – When tested with a covering of 50mm thick concrete paving on 50mm high InStar plastic pedestal supports a roof construction incorporating ProTherm G XENERGY SLP achieved a classification of Broof(t4) and as such is unrestricted by the National Building Regulations.

As a product in isolation
BS EN 13501-1:2016
– ProTherm G XENERGY SLP Inverted Roof Insulation contains PolyFR, a REACH compliant flame retardant, that ensures Euro Class E performance.

ProTherm ProTherm G XENERGY SLP Inverted Roof Insulation contains PolyFR, a REACH compliant flame retardant, that ensures Euro Class E performance to EN13501-1.

Hexabromocyclododecane (HBCD) was phased out prior to the 21st August 2015.

Description  Value
Appearance Grey Skin
Board Width 600mm
Board Thickness 50/80/100/120/130/140/160/180/200/205mm
Board Length 1250mm
Edge Profile Shiplap
Thermal Conductivity 0.030 W/mK – Thickness 40-50 mm
Thermal Conductivity 0.031 W/mK – Thickness 80-220mm
Certificates BBA No. 19/5633
Downloads
BBA ProTherm
BBA PermaQuik
DoP ProTherm G XENERGY SLP
PDS ProTherm G XENERGY SLP
SDS ProTherm G XENERGY SLP

Click on the items above to view or download information. To download multiple items as a zip file click + to add to a collection.

Please Login before adding files to a collection.